je cherche le pdf dans un des posts, et je réédite ce message

)
le lien de hawkem:
https://www.astraforum.fr/index.php/topic,2231.msg99326.html#msg99326mais le lien PDF n'est plus valable... heureusement que je collectionne les PDF (au cas où j'ai plus de net)
voilà la partie nous concernant, en anglais (à traduire):
A reset suffices in you are in ECOService and wish to remain in it for the Astra-H, Vectra-C and Signum.
TECH2 is only needed of you wish to switch from ECOService Flex to ECOService or vice-versa.
To prevent incorrect operation, when resetting the service interval on the Astra-H, it is also necessary to
depress the brake pedal
1 "Ignition OFF".
2 Press reset button (trip odometer), the display in the instrument cluster shows the odometer and trip
odometer.
3 Press and hold the reset button (trip odometer), the service interval display appears after approx. 3
seconds (e.g. "InSP 15,000" or "InSP 0").
4 Keep pressing reset button and also depress brake pedal, holding both down.
5 "Ignition ON". Keep reset button and brake pedal pressed, "InSP - - -" appears on the display
(flashing). Continue to hold down both until the service interval display changes.
6 The maximum distance to be travelled ("InSP 35,000 km" for petrol engines or "InSP 50,000 km" for
diesel engines with ECOService-Flex) and ("InSP 30,000) with ECOService 1) is displayed after
approx. 10 seconds. The service interval has been reset.
The timer in the instrument cluster is set to 24 months.
The engine control unit receives a signal via the CAN bus and the "oil level" is set to 100%.
This means that the control unit and the instrument have been reset to zero.
Note: Periods in which the vehicle is parked with the battery disconnected are not accounted for by the service interval display.
Un traducteur ?
